Rob Run: PC Requirements and Preparation
Before choosing MEMEZ, MASON, Arcane, SMG or Stealth for Rob Run, check more than your Windows version. Compare RAM, AVX, UEFI, overlay and window-mode requirements, then follow a practical checklist to prepare your PC and launch the selected product correctly.
Before choosing a product from the Rob Run catalog, compare your computer with the requirements of its specific guide. MEMEZ, MASON, Arcane, SMG and Stealth differ not only in features: they have different Windows, memory, overlay, window-mode and launch requirements. Checking these details first helps you eliminate incompatible options and avoid unnecessary system changes.
What to check before choosing a product
- Windows version and architecture. MEMEZ and MASON require Windows 11 x64, while Arcane supports Windows 10/11 x64. SMG lists Windows 10/11 without a separate x64 label, and Stealth adds specific OS-version restrictions.
- Additional hardware details. Arcane recommends 12 GB of RAM or more. Stealth requires an Intel or AMD processor with AVX support and UEFI mode.
- Your Rob Run version. MEMEZ, MASON and SMG specifically list the Steam version of the game.
- Overlay and window mode. MEMEZ uses one overlay of your choice, NVIDIA App or Discord, with windowed or borderless mode. MASON requires windowed mode only. Arcane uses the current Discord Overlay.
- Administrator access and restart readiness. MASON, Arcane, SMG and Stealth loaders run with administrator privileges. MASON may request a restart after its first launch, while Stealth automatically restarts the PC.
- Windows protection changes. Some guides require disabling Defender or SmartScreen and removing conflicting anti-cheats. These actions reduce PC protection, so perform only the steps for your selected product and restore protection after use.
System requirements and preparation table
The details below apply only to the corresponding product. Do not transfer requirements between them: for example, AVX and UEFI are listed for Stealth, while the RAM recommendation applies to Arcane.
| Product | Windows and hardware | Software and game mode | Before launch |
|---|---|---|---|
| Windows 11 x64 | Rob Run on Steam; NVIDIA App or Discord, one overlay only; windowed or borderless mode | Close the game, follow the guide's Defender requirement and activate your key; F1 in the lobby | |
| Windows 11 x64 | Rob Run on Steam; administrator privileges; windowed mode only | No USB drive required; a restart may follow the first launch; wait for loader confirmation | |
| Windows 10/11 x64; 12 GB RAM or more recommended | Visual C++ Redistributable; current Discord Overlay and hardware acceleration | Restart after installing the component; follow protection and anti-cheat requirements; do not switch windows after starting the game | |
| Windows 10/11 | Rob Run on Steam; administrator privileges | Prepare Windows protection as instructed; click Inject and wait for confirmation; F2 in the main menu | |
| Official Windows 10 21H1+ or Windows 11 up to 26H2; Intel/AMD with AVX; UEFI | Loader with administrator privileges | Save your work; automatic restart; do not interrupt the process before the Windows desktop appears |
How to check your computer
Windows version and build compatibility
Press Win + R, type winver and confirm. The window shows your Windows version and build. Compare them with the selected product's requirements. For Stealth, seeing only the Windows 10 or 11 name is not enough: check the OS version and use an official build. The complete list of supported versions is available in the official Stealth system requirements.
General Windows 10/11 support does not mean every configuration is compatible. Arcane separately specifies x64, while MEMEZ and MASON are not intended for Windows 10 under their published requirements. If your system version does not match the guide, choose a compatible product or contact support first rather than trying steps from another variant.
AVX and UEFI for Stealth
The official Stealth documentation suggests checking AVX with CPU-Z downloaded from its official website: AVX should appear in the processor's instruction block. To check BIOS mode, press Win + R, type msinfo32 and find BIOS Mode. Stealth requires the value UEFI.
These checks apply specifically to Stealth. Do not change BIOS or boot settings at random: if the value differs or you are unsure about the setting, review the official documentation or ask for help first. Save any open documents before launch as well, because the loader automatically restarts the PC.
RAM, overlays and window mode
For Arcane, 12 GB of RAM or more is a recommendation, not a stated strict minimum. Install Microsoft Visual C++ Redistributable using the link in the Arcane guide and restart your computer. In Discord, enable the current overlay and hardware acceleration, disable the legacy overlay and allow the overlay specifically for Rob Run.
For MEMEZ, choose NVIDIA App or Discord in advance and do not run both overlays together. Test NVIDIA Overlay with Alt + R; the game must use windowed or borderless mode. For MASON, select windowed mode only. Do not apply these limitations to Arcane, SMG or Stealth unless their own guides state them.
Preparing and launching each product
MEMEZ: one overlay and windowed or borderless mode
Close Rob Run and follow the developer's Windows Defender requirement in the MEMEZ guide. Then configure either NVIDIA App or Discord, leaving only one overlay active. Open the MEMEZ loader, enter your order key and press Enter. Start the game in windowed or borderless mode, press F1 in the lobby and use Insert for the menu.
If the overlay does not appear, make sure Discord, NVIDIA and other overlays are not running together. After use, restore Windows protection and restart your computer as directed by the guide.
MASON: loader before the game and load confirmation
Close the game, download the loader through the MASON guide and run it as administrator. Select ROB RUN (MaSoN Internal), enter your key and click Launch. If a restart is requested after the first launch, wait for Windows to load fully and run the loader again.
Do not open Rob Run until you see Cheat Success Loaded! Open game. Starting the game earlier may cause a crash. Once the game has fully loaded, wait for the sound signal; use Insert to reopen the menu. No USB drive is required, but Windows 11 x64, the Steam version of the game and windowed mode are mandatory.
Arcane: Visual C++, Discord Overlay and waiting for the menu
Install Visual C++ Redistributable and restart your PC. As required by the developer, disable SmartScreen and Defender, and remove FaceIt and Vanguard if installed. These actions reduce system protection; restore your security settings after use. Configure the current Discord Overlay with hardware acceleration and disable the legacy overlay.
Run the loader as administrator, wait for its update and enter your key. It closes automatically after a successful load. Open Rob Run and do not switch between windows: the menu normally appears within 1–2 minutes. Use HOME or INSERT to control it. Component and loader links, along with common fixes, are collected in the full Arcane guide.
SMG: Windows protection preparation and Inject
Before launch, follow the SMG guide: disable SmartScreen and use the specified method to disable Windows protection. Third-party antivirus software and FaceIt/Vanguard anti-cheats must be removed under the developer's requirements. Remember that this reduces computer protection; restore your settings after use.
Close Rob Run, download the loader from the official link in the guide and run it as administrator. Enter the key without extra spaces and click Inject. Do not open the game until the loader confirms that it has loaded. Then start Rob Run, press F2 in the main menu and wait for loading to finish; the guide notes that a few short stutters may occur. Use HOME to open and close the menu.
Stealth: AVX/UEFI checks and an automatic restart
First compare your Windows version, official OS build, AVX support and UEFI mode with the Stealth guide and official requirements. Fully close Rob Run and its launcher, then save your current work. Run the loader with administrator privileges, enter your key and click Activate, followed by Launch.
After the countdown, the computer automatically restarts. Do not power off the PC or interrupt the process before the Windows desktop appears: interruption may damage the boot partition. Once Windows loads, open the game and wait for the menu. HOME toggles the menu, while END unloads the product; reopening it after unloading requires another restart.
A safe preparation sequence
Use only the guide for your selected product
Do not combine the MEMEZ, MASON, Arcane, SMG and Stealth steps into one universal procedure. For example, Discord is required for Arcane, whereas MEMEZ offers a choice between Discord and NVIDIA. MASON and SMG require loader confirmation before the game starts, while Stealth includes an automatic restart. Take loader and component links from the relevant guide rather than third-party descriptions.
Restore protection after use
Disabling Defender or SmartScreen and removing antivirus software reduces Windows security. Perform only the required actions, keep track of how to reverse them and restore protection after use. Before launching other games after SMG, its guide also recommends restarting the computer and restoring Windows protection.
Final pre-launch checklist
- Your Windows version and architecture match the selected product's requirements.
- For Arcane, you have checked Visual C++, Discord Overlay and the RAM recommendation; for Stealth, the OS version, official build, AVX and UEFI.
- The required Rob Run version, overlay and window mode are ready.
- The game is closed, your order key is available and you know when the loader allows the game to start.
- Open work is saved, especially before Stealth's automatic restart.
- You know which protection changes are required and how to reverse them after use.
If your PC does not match the requirements or you encounter a specific error, contact MEMEZ support. Include the product name, Windows version, launch stage and error text, and attach a screenshot or video. For Arcane, also include your RAM amount and overlay settings; for Stealth, include your AVX and UEFI check results. If you have not chosen by features yet, see the comparison of all five Rob Run products.